We should admit some of us just can't afford the expensive iPhone 5, so some may trade in their kidneys, but there is no need to that, recently, a Chinese dude crafted an iPhone 5 out of a piece of steel. He published a set of photos on Sina Weibo showing how he made it. Check it out after the break.

A steel plate at 140mm long, 60mm wide and 6mm thick. It is just perfect for iPhone5.Then began to cut and polish the steel plate according to iPhone5’s dimensions.Measuring the sizeDraw a line on the plate where it will be cut as the tiny groove of the iPhone 5.

Make the steel grey by using chemical water. Don’t dye it with paint because it will fade easily.

Using a polishing machine to polish the plate surface, which help to remove all the iron rust to make it feel smooth.Polishing Machine

Using the same chemical water to dye the top and bottom part of the plate in order to make them darker than other parts of the plate.Draw an Apple logo and the “iPhone 5″ with a pencil.

Print a copy of the menu interface and stick it on the screen. The masterpiece is done.